Using the LAN and ISDN cascade connection
Installing both the PCSA-M3G70 H.323 and PCSA-M0G70 H.320 MCU
software in two Communication Terminals enables cascade connection
including two main terminals. Connecting four terminals to one main terminal
allows you to conduct a multipoint videoconference via a LAN and ISDN with
up to ten points.
PCSA-M3G70
PCSA-M0G70
*Be sure to connect two Communication Terminals, with the MCU software installed, via a LAN.
Note
Be sure to make connection between two Communication Terminals via LAN. Even if
the PCSA-M0G70 H.320 MCU software is installed in both the Terminals, cascade
connection via an ISDN is not available.
168
Connection Examples for a Multipoint Videoconference
LAN *
PCSA-M3G70
PCSA-M0G70