Connection Examples For A Multipoint Videoconference; Using The Lan Connection (Up To 6 Points) - Sony IPELA PCS-G70 Operating Instructions Manual

Connection Examples for a Multipoint
Videoconference

Using the LAN Connection (Up to 6 Points)

Installing the optional PCSA-M3G70 H.323MCU software in a
Communication Terminal allows you to conduct multipoint videoconferences
with up to six points.
Connecting five monitors allows you to display each of several points on a
different monitor. The point names are displayed on-screen.
If you are already conducting a two-point videoconference when a third point
call, the system automatically opens a multipoint conference. This is referred
as the "on-the-fly" function.
PCSA-M3G70
H.323 MCU
software
MCU VIDEO OUT AUDIO OUT
(MIXED)
1 2 3 4 5
DC 19.5V IR OUT
AUX CONTROL
1 2 CTRL-S
AUX
to 100BASE-TX/
Note
For a multipoint videoconference only the Communication Terminal in which the
PCSA-M3G70 H.323 MCU software can be installed is used as main terminal. If you
want to use multiple Communication Terminals as main terminals depending on the
type of conference, the same number of H.323 MCU software as that of the main
terminals is required.
204

Connection Examples for a Multipoint Videoconference

TERMINAL VISCA OUT
AUDIO IN MAIN SUB
AUX LINE MIC CAMERA AUX IN CAMERA AUX IN
(PLUG IN POWER)
1 2
WHITE 100BASE-TX/
1 2
EC-MIC RGB OUT BOARD 10BASE-T DSB
1 2 ISDN UNIT
MONITOR
VIDEO OUT
10BASE-T
UTP cable (category 5, straight)
(not supplied)
POWER
POWER
POWER
POWER
POWER
to LAN
LAN