Using Multiple Microphones - Sony IPELA PCS-G50 Operating Instructions Manual

Using Multiple Microphones

You can connect several optional PCS-A1 (supplied) or PCSA-A3 (not
supplied) microphones to the system, allowing more people to participate in
the conference.
To connect the optional microphones
Connect the optional microphones to the MIC 1 and MIC 2 connectors on the
Communication Terminal. Power is supplied to the microphones from the
terminal.
AUDIO OUT
(MIXED)
DC 19.5V IR OUT
AUX CONTROL
1 2 CTRL-S
AUX
to MIC 1
To use the connected microphone
Set "Mic Select" to "MIC" on page 1 of the Audio Setup menu.
(See page 53.)
Notes on installation of the microphones
• Install microphone about 50 cm away from the participants.
• Install the speakers behind the microphones.
• Place the microphone in a quiet, echo-free location.
• Install microphones away from equipment that may cause noise.
• Avoid covering a microphone with paper, etc., or moving it. If you do either,
extreme noise and echo may be heard temporarily by the remote party. In this
case, wait until the echo disappears.
TERMINAL VISCA OUT
AUDIO IN VIDEO IN
AUX LINE CAMERA AUX IN
MIC
(PLUG IN POWER)
1 2
WHITE 100BASE-TX/
1 2
EC-MIC RGB OUT BOARD 10BASE-T DSB
1 2 ISDN UNIT
MONITOR
VIDEO OUT
to MIC 2
PCS-A1 (supplied) or PCSA-A3 microphone
(not supplied)
Using Multiple Microphones
133