Table of Contents
Advertisement
Using Multiple Microphones
You can input the stereo sound from two PCS-A1 (one is supplied) or PCSA-
A3 (not supplied) microphones to the system.
To connect the microphones
Connect the optional microphones to the MIC (A1/A3) 1 (R) and 2 (L) jacks
on the Communication System. Power is supplied to the microphones from the
System.
CAMERA
to MIC (A1/A3)
1 (R)
To use the connected microphones
Set "Audio Input" to "MIC" on the Basic Setup1 page of the Audio setup
menu, and set "Input Select (MIC)" to "MIC (A1/A3)" (page 64).
To input the stereo sound from two microphones, set "Input Mode" to "Stereo"
(page 65). Set it to "Monaural" to input monaural sound from two
microphones.
Notes on installation of the microphones
• Install microphone about 50 cm (1.6 ft) away from the participants.
• Place the microphone in a quiet, echo-free location.
• Install the speakers so that the participants do not come between it and the
microphones.
• Install microphones away from equipment that may cause noise.
TERMINAL
VISCA OUT
RGB IN
RGB OUT
HDMI OUT
ISDN UNIT
MIC(A1/A3)
1(R)
2(L)
R
L
R
L
(PLUG IN POWER)
AUDIO OUT
REC OUT
to MIC (A1/A3)
2 (L)
PCS-A1 (one is supplied) or
PCSA-A3 microphone (not supplied)
AUX CONTROL
DC 19.5V
Microphone (Left)
Microphone (Right)
Using Multiple Microphones
157
Advertisement
Table of Contents
