Table of Contents
Advertisement
If you see this...
The colors look
drastically wrong.
The startup page comes
out skewed.
If you've followed all of the instructions in this chapter and still have problems you can't
solve, see appendix A, "QMS Customer Support," for information on getting help.
Status and service messages are displayed in the control panel message window. They
provide information about your printer and help you locate many problems. When the
condition associated with a displayed message has changed, the message is cleared
from the window.
»
Note: Status messages are not displayed while the printer is off line.
This status message...
ACC ALREADY DISABLED
ACC ALREADY ENABLED
ACC DISABLED
ACC ENABLED
It's probably because...
The toner cartridges are
not correctly installed.
The transfer unit was
jarred open during the
installation and needs to
be closed.
means...
The accounting option selected
is now in effect.
The accounting option selected
is now in effect.
The accounting option selected
is now in effect.
The accounting option selected
is now in effect.
Do this...
Check the toner cartridge installation.
Refer to "C. Installing the Toner
Cartridges," in the Installation Guide .
Refer to the steps in "B. Unpacking
the Printer" in the Installation Guide
for information on opening and closing
the unit.
Do this...
No action needed.
No action needed.
No action needed.
No action needed.
Advertisement
Table of Contents
