Minolta MAGICOLOR 2 PLUS Manual page 147

System Use
Printer Memory
This hotlink provides the status of the hard disk.
Disk(s)
Total
This hotlink provides the status on established timeouts.
Wait
Job
Shows the size (in KB) of the System Use. Also known as Sys-
tem Memory, this non-configurable client is the amount of RAM
used to run the printer's operating system. It's never increased
or decreased. The system memory subtracted from the total
amount of RAM identifies the amount of RAM available for all
the other memory clients.
Configuration Menu: No equivalent
Shows the size (in KB) of the total amount of RAM that your
printer has.
Configuration Menu: Administration/Memory/Manual Config/
MB Printer Mem
Provides the name, size, and free space on all attached hard
disks.
Configuration Menu: No equivalent
Identifies the total space and free space on all attached hard
disks.
Configuration Menu: No equivalent
Shows the maximum number of seconds the PostScript
emulation waits for incoming data before ending the job.
Configuration Menu: Administration/Communications/
Timeouts/PS Wait Timeout
This shows the maximum number of seconds the printer
processes a PostScript job before it ends the job.
Configuration Menu: Administration/Communications/
Timeouts/Job Timeout