Table of Contents
Advertisement
Lift the printer from the bottom only, using the carrying grips under each side cor-
ner. Make sure two people are available to lift the printer when moving it.
Keep the following in mind when storing the printer for an extended period:
— Unplug the printer.
— Remove the toner and OPC belt cartridges from inside the printer. After
removing the cartridges, return them to their original packaging. If the original
packaging is not available, protect the toner cartridges from spilling toner, and
protect the OPC belt cartridge from damage and light.
— See appendix B, "Technical Specifications," in the Reference manual for stor-
age specifications.
Paper dust may accumulate inside the printer. This could affect the printer's perfor-
mance. To prevent any potential problems associated with this, you should clean your
printer on a regular basis. You need to clean both the inside and outside of the printer.
WARNING! Turn off the printer, unplug the power cord, and disconnect all interface
cables before cleaning.
ACHTUNG! Ziehen Sie den Netzstecker aus der Steckdose bevor Sie den Drucker
reinigen.
Either clean the printer before use, or allow a few minutes after unplugging it to
allow the fusing unit to cool down.
Turn off the printer, unplug the power cord, and disconnect all interface cables
before cleaning inside the printer.
Read all caution and warning labels carefully, making sure to follow any instruc-
tions contained in them. These labels are located on the inside of the printer's
covers and the interior of the printer body.
Use only dry, lint-free cotton cloths or swabs.
Advertisement
Table of Contents
