Table of Contents
Advertisement
8
Holding the cartridge above the
printer, align the guide pins on the
cartridge with the guide slots in the
green lock levers.
The gear on the cartridge goes to the
right.
9
Gently guide the cartridge into the
printer.
Caution: The cartridge should slide easily into the printer. Don't force it.
10 Rotate the two green lock levers to
secure the OPC belt cartridge in the
printer.
11 Close the printer's front and top cov-
ers.
12 If you have a duplexer, close the
duplexer's rear cover.
13 Turn on the printer.
14 In the Operator Control/Consumables/Item Replaced/OPC Cartridge menu
choose Yes to reset the consumables monitoring system.
»
Note: When you replace the OPC belt cartridge after a REPLACE BELT
message displays in the message window, the engine automatically recovers.
However, you must manually reset the consumables usage monitoring system to
ensure accurate consumables monitoring.
To access consumables usage information, use the Operator Control/Consum-
ables/Print Statistics menu or the CrownView printer web page.
Advertisement
Table of Contents
