Host-Based Color Matching - Minolta MAGICOLOR 2 PLUS Manual

#    
8 Choose OK.
You should see a list of available QMS printers.
9 Select the QMS printer that you are installing the WPD driver for and
choose OK.
Windows may or may not ask for the updated driver, depending on what has
already been installed. If it does not ask for an updated driver, the QMS printer
that you selected will appear in the list of installed printer.
You will find that the magicolor 2+ provides an array of robust color matching options
that allows the user to custom tailor a specific color matching setup for his or her par-
ticular needs. Below is the list of color matching options available for Macintosh.


ColorSync Color Matching


Printer-Resident ICC Color Matching


QMS Advanced Level 2 Color Matching
Since the magicolor 2+ offers multiple color matching options, remember that only one
color management system can "drive" the printer at a time. Please read the following
sections thoroughly to ensure that you understand how to select each of these color
matching options.
ColorSync is host-based color matching software that is provided by Apple. Current
versions of the Macintosh system software install and support the ColorSync color
matching software. To determine if you have this software installed on your Macintosh,
check the Control Panels folder in the Apple menu. If you need to install ColorSync,
locate your Macintosh System Software CD-ROM and run the Installer.
To invoke ColorSync color matching you will need to perform the
following steps:
1 Make sure you've installed the magicolor 2+ PPD and you have the
magicolor 2+ ICC profiles installed correctly on your Macintosh. If you have
not, locate the QMS Software Utilities CD-ROM that shipped with your
printer and install these first.