Table of Contents
Advertisement
8
Close the green lock levers to secure the cleaning roller.
9
Install the fuser roller shipping restraints.
These restraints protect the fuser rollers from damage during a move by
removing the pressure between the two rollers. They must be removed again
before printing.
a
Open the green pressure-release levers (one at each end of the fuser) to
separate the two rollers in the fuser.
b
Insert the two fuser roller shipping restraints between the fuser rollers.
Caution: Be sure to insert the shipping restraints at the ends of the rollers,
not in the middle. Inserting them in the middle will damage the rollers.
Advertisement
Table of Contents
