Table of Contents
Advertisement
Press this key... to...
Select
Access the Baud Rate menu.
Next (one or
Advance to the correct baud rate.
more times)
Select
Select the displayed baud rate.
» Note: If you need to change other settings, press the Next key to access the appropriate
menu option, and then return to the point where you press the Select key to access the
Administration menu and select the new settings.
Online/Offline
Access the Save Changes option.
Next
Advance to the Yes option.
Select
Save changes.
Online/Offline
Put the printer back on line (the Ready
indicator lights).
1
Turn the printer off and on again to produce a startup page.
2
Compare the serial port settings listed on the startup page to those in your
AUTOEXEC.BAT file.
3
Try the communication test again.
If a blank page ejects from the printer, the printer and the PC are communicating. If a
blank page doesn't eject and you typed the file correctly, refer to your DOS documen-
tation for more information.
The message window reads...
BAUD RATE
*9600
BAUD RATE
#
#
IS SELECTED
SERIAL
BAUD RATE
SAVE CHANGES?
*NO
SAVE CHANGES?
YES
IDLE
IDLE
Advertisement
Table of Contents
