Table of Contents
Advertisement
The waste toner pack collects the waste toner from the printing process so you can
conveniently throw it away.
1
Open the printer's front cover.
2
Remove the waste toner pack.
The illustration for this step shows the
printer without the duplexer. However,
the instructions are the same for all
models.
3
Use the label on the side of the old
waste toner pack to seal the open-
ing, and then dispose of the pack in
accordance with safety laws and
regulations in your area.
4
Insert the new waste toner pack.
5
Close the printer's front cover.
6
In the Operator Control/Consumables/Item Replaced/Waste Toner Pack
menu choose Yes to reset the consumables monitoring system.
Note: When you replace the waste toner pack after a CHECK WASTE TONER
»
message displays in the message window, the engine automatically recovers.
However, you must manually reset the consumables usage monitoring system to
ensure accurate consumables monitoring.
To access consumables usage information, use the Operator Control/Consum-
ables/Print Statistics menu or the CrownView printer web page.
Advertisement
Table of Contents
