Table of Contents
Advertisement
Take a stack of about 250 sheets ( ½ ream).
1
»
Note: Don't unwrap the paper above the printer as this might cause paper
particles to fall into the printer.
2
Holding the stack with one hand, fan the paper with the other.
This gets air through the sheets and prevents static buildup.
3
Take off the top and bottom sheets.
Residual glue buildup on these sheets may cause media jams.
1
Remove the media cassette from the printer.
2
Adjust the media guides to fit the size paper you're loading.
Squeeze the retainers at the ends of the left width guide and/or the length guide,
move the guide to the appropriate location (media sizes are listed on the cas-
sette), and release the retainers.
Advertisement
Table of Contents
