Table of Contents
Advertisement
#
Note: The default setting for RGB Source is set to sRGB.
»
The choices for Simulation are SWOP , Eurocolor, Commercial, CMYK Display, Inkjet
Proofer, None, and Printer Default.
When Internal ICC Color Matching is selected, the Simulation can be set from the
above list to allow the magicolor 2+ to simulate another color output device's color
space, such as SWOP or Eurocolor.
»
Note: The default setting for Simulation is set to None which provides the optimum
output quality of the magicolor 2+.
Another selectable option for the magicolor 2+'s built-in color matching. Listed below
are the user-selectable settings when you click on the Configure button next to Use
CRD Color Matching.
Images
Graphics
Text
You will be able to select Business, Colorimetric, Printer Default or the Photographic
CRD for Images, Graphics, or Text. The default CRD for Images and Graphics is Pho-
tographic, and for and Text the default CRD is Business.
You are able to select a CRD Color Space within the Use CRD Color Matching on the
Color tab. Click on Configure and you will be able to select Device RGB, sRGB, Trini-
tron G1.8D50, Apple RGB, Printer Default, or PrePress as a CRD Color Space. The
default setting for CRD Color Space is Device RGB.
You can also load custom CRD Color Space profiles from this option. The README
file for Colorific and CrownAdmin explain how to load custom CRD color spaces.
Doug and Baret to fix
1
If you haven't already, install the QMS NT Windows driver.
Advertisement
Table of Contents
