Table of Contents
Advertisement
This status message...
BACK PANEL OPEN
BELT CARTRIDGE
MIS-INSTALLED
CANCEL JOB
CANCEL ALL JOBS
CHECK CLEANING
ROLLER
CHECK WASTE TONER
CLOSE ENGINE DOOR(S)
COOLDOWN
CREATED FILE
means...
The rear cover over the transfer
unit is not closed.
The OPC belt cartridge is either
missing or incorrectly installed.
The Cancel key has been
pressed, and one or more of the
print jobs in the print queue are
being canceled.
The Cancel key has been
pressed, and one or more of the
print jobs in the print queue are
being canceled.
The cleaning roller needs to be
replaced.
Either the waste toner pack is
full and needs to be replaced, or
it is incorrectly installed.
One or more of the front or side
covers is open and must be
closed.
After 200 1-sided (or 100
2-sided) pages of a continuous
print run of plain paper, the
magicolor 2+ automatically
pauses for 3 minutes to cool
down the engine
The accounting file has been
created.
Do this...
Close the rear cover.
Ensure that an OPC belt
cartridge is correctly
installed.
Press Select and the
oldest job in the print
queue will be canceled.
Press Select for all jobs
with a printing,
interpreting, spooled, or
terminating status to be
completely removed
from the system.
Install a new cleaning
roller.
Ensure that the waste
toner pack is not full and
is correctly installed.
Close the front or side
covers.
No action needed.
No action needed.
Advertisement
Table of Contents
