You can check communication between the printer selected in the Chooser and the
Macintosh by sending a file to the printer from an application (see your application
documentation for more information) or by printing a directory, as described here:
1
Display a disk or folder window.
2
Set up page information.
a
From the File menu choose Page Setup.
b
Select paper size, orientation, and other necessary options.
c
Choose OK.
3
Print a directory or a window.
a
From the File menu choose Print Directory or Print Window. A dialog box
appears.
b
Select the printing options you want, and then choose OK.
This section contains a list of possible printer problems and solutions. Be sure you've
followed the steps in the QMS magicolor 2+ Installation Guide .
If there is no status message in the control panel message window, use the following
steps to identify the source of your problem and to learn of possible solutions:
1
Does the printer power light come on?
YES - Go to number 2.
NO - Check the following:
Is power supplied to the AC outlet.