Minolta MAGICOLOR 2 PLUS Manual page 95

MYPROF.ICC
UMAXD50.ICC
» Note: If you do not rename your files correctly, the magicolor 2+ PPDs can not
select the custom profiles. However, you will still be able to download the profiles
and use them as a default setting for the RGB Source and Simulation for ICC
Color Matching.
2 Once you have renamed your custom ICC RGB Source or Simulation, you
will need to used CrownAdmin to download a profile to the magicolor 2+.
Locate your QMS Software Utilities CD-ROM and install CrownAdmin if
3
necessary.Download the custom profile via CrownAdmin.


Select PS Utilities... from the Printer menu.


Under the Download tab select Destination as Other.


Select the Local Files... button and specify the ICC profile to download.


Click Open.


Select Remote Path... and go to USR.


Click Select.
4 Verify the destination as SYS:/USR/*.*.
You might need to type this information in, if it is not present.
5 Select Download to send the custom ICC RGB Source or Simulation profile
to the magicolor 2+'s internal hard drive.
6 Verify the SProfile.ps file contains the correct file name.
You can use a text editor such as Notepad or SimpleText to change the file name
listed in the SProfile.ps file.
7 Download the file SProfile.ps to register the profile.


Select PS Utilities... from the Printer menu.


Under the Download tab, select Destination as PostScript.


Select the Local Files... button and specify the SProfile.ps.


Click Open.
custrgb2.icc
custrgb3.icc