Table of Contents
Advertisement
It's necessary to clean the laser lens only when you find vertical white or light-color
streaking in all primary colors on your printouts.
A dry cotton cloth or dry cotton swab is required for this procedure.
1
Open the printer's front cover.
2
Remove the four toner cartridges.
3
Remove the laser lens.
Use the two tabs on top of the lens.
4
Using a dry cotton cloth, wipe the lens.
5
Reinstall the laser lens.
It slides in at a 45° angle.
6
Reinstall the four toner cartridges.
7
Close the printer's front cover.
If you have an EXD model, you should clean the inside of the duplexer on a regular
basis.
Note: A dry cotton cloth is required for this procedure.
»
1
If you have a duplex model, follow steps 2 through 14.
If not, skip to "Cleaning the Exterior of The Printer" on page 6-19.
Advertisement
Table of Contents
