Table of Contents
Advertisement
1
In the printer driver (Paper tab, Media Type option), select Thick Stock.
2
On the control panel, press the Media key to select printing on thick stock.
3
Remove the media cassette from the printer (and remove any media in the
cassette).
4
Load the new media.
»
Note: If your label stock has a top-of-page, place the top-of-page toward the rear
of the printer.
5
Slide the media cassette back into the printer.
6
In the Operator Control/Media/For Upper Bin menu, select Thick Stock.
Formatting
Format the information to be printed on the thick stock within your application.
Try printing your data on a plain sheet of paper first to check placement.
Input
Cassette
Capacity
Type
Weight
Long-grain thick stock, up to 43 lb bond (163 g/m²)/60 lb cover (162 g/m²)/90
lb index (163 g/m²)
Media Type
Thick Stock
Print Mode
Thick Stock
Notes
You should test the number of sheets of thick stock a media cassette can hold
to ensure that its performance is acceptable. Do not exceed the fill level on
the inside left side of the cassette.
Remember to reset the Media key and the printer driver when switching from
thick stock to plain paper or transparencies.
Letter/A4 or universal
Up to 50 sheets, depending on the thickness of the media
Thick stock, such as
– Warren Spectratech Index
– Hammermill ColorCopyCover
– Weyerhaeuser Cover/Card
Advertisement
Table of Contents
