Table of Contents
Advertisement
#
%
!&
#
Select Remote Path... and go to PostScript.
Click Select.
To view the current profiles on the magicolor 2+ access Special Pages under the
Administration menu and select Yes under CMM Profile Page.
To utilize your custom profiles, you will need to select Custom 1, Custom 2 or Custom
3 from the RGB Source or the Simulation pop-up menus located under Printer Specific
Options in the Print dialog box for Macintosh. In Windows 95, you can utilize your pro-
files from the Color tab by selecting Configure for ICC Color Matching or selecting
Document Defaults in the QMS Windows NT driver.
Note: You can only download one custom profile at a time to the magicolor 2+. After
»
each download of a custom ICC profile, be sure to send the SProfile.ps file to ensure
that the new custom profile is available for use or restart the magicolor 2+.
The magicolor 2+ may be profiled using third-party software such as ColorBlind
MatchBox. Refer to the vendor's software documentation for installation and usage
instructions. One created, a new ICC profile can be downloaded to the magicolor 2+ to
recharacterize the printer's entire color matching system.
Details for downloading for recharacterization are not included in this manual. These
instructions may be found in the Frequently Asked Questions (FAQs) on the QMS
website at http://www.qms.com/support. Perform a keyword search for "mc2+ and
profiling".
These instructions will include the required driver, configuration, and other steps for
profiling the magicolor 2+ printer.
Chapter 6, "Printer Care," explains how to handle and clean the printer.
Advertisement
Table of Contents
