Table of Contents
Advertisement
Note: Load the media printing-side up with the top of the media (the letterhead or
»
memo information) toward the back of the cassette.
If you have an EXD model and wish print on both sides, load the media
printing-side down with the top of the media (the letterhead or memo information)
toward the front of the cassette.
5
Slide the media cassette back into the printer.
On the EXD model, in the Administration/Engine/Letterhead menu, there is an option
that will allow you to put both simplex and duplex jobs on letterhead paper from the
same inputbin (cassette) without having to sort the pages manually.
The pages must be loaded printing-side down in the input bin with the top of the media
(the letterhead or memo information) toward the front of the cassette.
»
Note: You may notice a decrease in the printing speed depending on the mix of
simplex and duplex pages.
Caution: Although the QMS magicolor 2+ was designed for occasional printing on a
wide range of media types, it is not intended to print exclusively on a single media type
except plain paper. Continuous printing on media other than plain paper (such as
envelopes, glossy stock, labels, thick stock, transfer media, or transparencies) may
adversely affect print quality or reduce engine life.
Advertisement
Table of Contents
