Table of Contents
Advertisement
5
Remove the protective sheet from
the cartridge, and then pull out the
two orange tension-release pins
(one on each side of the cartridge).
»
Note: Save the spacers in case you
need to repack the printer for relocation
or shipping later.
6
Holding the cartridge above the
printer, align the guide pins on the
cartridge with the guide slots in the
green lock levers.
The gear on the cartridge goes to the
right, and the green surface of the car-
tridge faces you.
7
Gently guide the cartridge into the printer.
Caution: The cartridge should slide easily into the printer. Don't force it.
8
Rotate the two green lock levers to
secure the OPC belt cartridge in the
printer.
9
Close the printer's front and top
covers.
10 If you have an EXD model, close the
duplexer's rear cover.
Advertisement
Table of Contents
