You can view this information to see the status of the printer, but you can change it only
by accessing the printer's configuration menu through the printer control panel, a remote
or local console, or CrownAdmin.
This table provides you with data relative to the settings of the printer.
Compatibility
Level
Do Startup Page
Do Error Handler
Do Sys/Start
Is Password 0?
Duplex [EXD
Models Only]
Identifies the PostScript emulation level.
Configuration Menu: No equivalent
Identifies whether the printer startup page is turned on or off.
Configuration Menu: Administration/Startup Options/Do Start
Page
Identifies whether the PostScript Error Handler is loaded into
memory when the printer is turned on. Error Handler is a
diagnostic tool that identifies PostScript errors encountered
during a print job.
Configuration Menu: Administration/Startup Options/Do Error
Handler
Identifies whether the printer controller checks the hard disk for
a PostScript file named Sys/Start and then executes the file.
This file does not print.
Configuration Menu: Administration/Startup Options/Do
Sys/Start
Identifies whether the Administration menu password is set.
0=On
Configuration Menu: Installation/Use Admin Pwd
Identifies whether the duplex option is Off, duplexed on the
Long Edge (flipped horizontally as in a loose-leaf notebook), or
duplexed on the Short Edge (flipped vertically as on a clipboard)
if you have an EXD model.
Configuration Menu: Operator Control/Duplex