Table of Contents
Advertisement
»
Note: If you're returning the printer for service, you don't need to return the power
cable, interface cables, or media cassette(s).
1
Turn off the printer.
2
Remove the power cable and all interface cables.
3
Remove the media cassette(s) from the printer.
1
Open the printer's front cover.
2
Remove the four toner cartridges, attach the protective shields over their
magnetic rollers, and repackage them in their original packaging.
Caution: The OPC belt is extremely sensitive to bright light and direct sunlight. Any
exposure to light should be limited to less than 2 minutes or permanent damage could
result. While the printer is being moved, store the cartridge in its original shipping bag.
If you don't have this bag, carefully wrap it in a piece of dark, heavy cloth, and place it
where it will not get scratched or damaged. If exposure exceeds 2 minutes, put the
cartridge in a dark place to recover before using it again. Depending on exposure,
recovery may take up to 2 hours. Recovery time is dependent on the amount of
exposure sustained, and recovery is not guaranteed.
Also, handle the OPC belt cartridge carefully. The belt's extremely sensitive to body
oils, moisture, solvents, corrosives, dust, and scratches, all of which will reduce print
quality.
1
Open the printer's front cover.
Advertisement
Table of Contents
