Ruijie RG-RAP73Pro Cookbook page 85

Web-based Configuration Guide
3.6 Configuring Wi-Fi Band
(1) Go to the page for configuration.

Method 1: Choose Network-Wide > Workspace > Wireless > Wi-Fi > Wi-Fi List. Select the Wi-Fi network,
and click Edit.

Method 2: Choose One-Device > Config > WLAN > Wi-Fi > Wi-Fi List. Select the Wi-Fi network, and click
Edit.
(2) Set the band of Wi-Fi signals. Both the 2.4 GHz, 5 GHz, and 6 GHz frequency bands are supported. The 6
GHz frequency band has a faster transmission rate and less interference compared to the 2.4 GHz and 5
GHz frequency bands, but it is usually not as good as the 2.4 GHz and 5 GHz frequency bands in terms of
signal coverage and wall penetration. The 5 GHz frequency band has a faster transmission rate and less
interference compared to the 2.4 GHz frequency band, but it is usually not as good as the 2.4 GHz frequency
band in terms of signal coverage and wall penetration. You can select the signal frequency band according
to the actual needs. The default frequency band is 2.4 GHz + 5 GHz or 6 GHz. When 2.4 GHz + 5 GHz is
selected, Wi-Fi signals are emitted simultaneously in the 2.4 GHz and 5 GHz frequency bands. When 6 GHz
is selected, Wi-Fi signals are broadcasted in the 6GHz frequency band.
30
Wi-Fi Network Settings