Ruijie RG-RAP73Pro Cookbook page 100

Web-based Configuration Guide Wi-Fi Network Settings
If the access point is associated with too many clients, it will have a lower performance, affecting user experience.
After you configure the threshold, new clients over the threshold will not be allowed to access the Wi-Fi network.
You can lower the threshold if there is requirement for bandwidth per client. The Client Count Limit toggle
switch is disabled by default. If there is no need to set a client limit, please keep the default setting.
You can toggle on the Client Count Limit toggle switch to set a client limit, and then click Save.
Note
The Client Count Limit refers to the maximum number of clients that can be connected to a single access
point.
4. Configuring the Kick-off Threshold
Choose Network-Wide > Workspace > Wireless > Radio Setting.
In the case of multiple Wi-Fi signals, setting the kick-off threshold can improve the wireless signal quality to a
certain extent. The farther the client is away from the access point, the lower the signal strength is. If the signal
is lower than the kick-off threshold, the Wi-Fi will be disconnected, and the client will be forced offline and select
a nearer Wi-Fi signal.
However, the higher the kick-off threshold is, the easier it is for the client to be kicked offline. To ensure normal
Internet access, you are advised to disable the kick-off threshold or set the value to less than -75dBm. After
adjusting the configuration, click Save.
45