Ruijie RG-RAP73Pro Cookbook page 184

Web-based Configuration Guide
Table 4-3 IPv6 Address Configuration Parameters of the WAN Port
Parameter
Internet
IPv6 Address
IPv6 Prefix
Gateway
DNS Server
N/AT66
4.17.6 Configuring the IPv6 Address for the LAN Port
Choose One-Device
When the device accesses the network in DHCP mode, the upstream device can assign an IPv6 address to the
LAN port, and assign IPv6 addresses to the clients in the LAN based on the IPv6 address prefix. If the upstream
device cannot assign an IPv6 address prefix to the current device, you need to manually configure an IPv6
address prefix for the LAN port, and assign IPv6 addresses to the clients in the LAN by enabling the N/AT66
function (see 4.17.5 Configuring the IPv6 Address for the WAN
Description
Specify the method for obtaining an IPv6 address for the WAN port.
If Internet is set to DHCP/PPPoE, the automatically obtained IPv6
address is displayed.
If Internet is set to Static IP, you need to manually configure this
parameter.
If Internet is set to DHCP/PPPoE and the current device obtains the
IPv6 address prefix from the upstream device. The obtained IPv6
address prefix is displayed.
If Internet is set to DHCP/PPPoE, the automatically obtained
gateway address is displayed.
If Internet is set to Static IP, you need to manually configure this
parameter.
If Internet is set to DHCP/PPPoE, the automatically obtained DNS
server address is displayed.
If Internet is set to Static IP, you need to manually configure this
parameter.
If the current device cannot access the Internet in DHCP mode or
cannot obtain the IPv6 address prefix, you must enable N/AT66 to
assign the IPv6 address to an intranet client.
> Config > Network > IPv6 Address > LAN Settings.
DHCP/PPPoE: The current device will act as a DHCPv6 client
and apply for the IPv6 address/prefix from the upstream network
device.
Static IP: If this Internet connection type is selected, you need
to manually configure a static IPv6 address, gateway address,
and DNS server.
Null: The IPv6 function is disabled on the current WAN port.
Port).
129
Network Settings