Ruijie RG-RAP73Pro Cookbook page 196

Web-based Configuration Guide
6
System Settings
6.1 PoE Settings
Choose One-Device
Set the power mode for the AP to accept power over PoE. In AF mode, the maximum power supported by the
device is 15.4 W. In AT mode, the maximum power is 30 W according to the IEEE 802.3at standard. In BT mode,
the maximum power is 51 W according to the IEEE 802.3bt standard. By default, the device automatically
negotiates with the power sourcing equipment (PSE) about the power mode. The default configuration is
recommended.
6.2 Setting the Login Password
Access the configuration page:

In self-organizing network mode: Choose Network-Wide > Workspace > Network-Wide > Password.

In standalone mode: Choose System > Login > Password.
Enter the old password and new password. After saving the configuration, use the new password to log in.
Caution
In self-organizing network mode, the login password of all devices in the network will be changed
synchronously.
> Config > Advanced > PoE Settings.
141
System Settings