Web-based Configuration Guide
Click View Unfollowed Alert to view the unfollowed alert. You can follow the alert again in the pop-up window.
7.4
Fault Collection
Choose One-Device > Config > Diagnostics > Fault Collection.
When an unknown fault occurs on the device, you can collect fault information on this page. Click Start to collect
fault information and compress it into a file for engineers to identify fault.
7.5
Packet Capturing
Choose One-Device > Config > Diagnostics > Packet Collection.
If the device fails and troubleshooting is required, the packet capture result can be analyzed to locate and rectify
the fault.
Select an interface and a protocol and specify the host IP address to capture the content in data packets. Select
the file size limit and packet count limit to determine the conditions for automatically stopping packet capture. (If
the file size or number of packets reaches the specified threshold, packet capture stops and a diagnostic
package download link is generated.)
181
Network Diagnosis Tools
Need help?
Do you have a question about the RG-RAP73Pro and is the answer not in the manual?