Ruijie RG-RAP73Pro Cookbook page 185

Web-based Configuration Guide
Click Edit corresponding to the default VLAN, and fill in a local address of no more than 64 bits in the IPv6
Address/Prefix Length column. This address will also be used as the IPv6 address prefix.
IPv6 Assignment specifies the method for assigning IPv6 addresses for clients. The following options are
available:

Auto: Both DHCPv6 and SLAAC are used to assign IPv6 addresses to clients.

DHCPv6: DHCPv6 is used to assign IPv6 addresses to clients.

SLAAC: SLAAC is used to assign IPv6 addresses to clients.

Null: No IPv6 addresses are assigned to clients.
The setting of IPv6 Assignment is determined by the protocol supported by intranet clients. If you are not sure
about the protocol supported by intranet clients, select Auto.
You can click Advanced Settings to configure more address attributes.
130
Network Settings