Ruijie RG-RAP73Pro Cookbook page 25

Installation Guide
4
Debugging
4.1 Setting Up the Configuration Environment
After powering on the AP through a DC power adapter or a PoE power source equipment, ensure that the power
cord is properly connected and meets safety requirements.
4.2 Powering on the AP
4.2.1 Checklist Before Power-On

The power cord is properly connected.

The input voltage meets the requirement.
4.2.2 Checklist After Power-on

Verify the LED status.

After the AP is powered on, check whether the SSID (@Ruijie-mXXXX for multiple devices or @Ruijie-sXXXX
for a single device) can be searched by a mobile phone or other wireless devices.
4.3 Logging in to the Web GUI
(1) Power on the PC and configure the local connection attribute on the PC. Set the IP address of the PC to
10.44.77.XXX (1 to 255, excluding 254).
(2) Open a browser on the PC and enter 10.44.77.254 to log in to the web interface. The default password is
"admin" for the first login. For security purposes, change the default password after login.
17
Debugging