Advertisement
Configuration Guide
Alternatively, you can select an existing wireless VLAN and click Setup to edit the VLAN.
(1) Configure the SSID, Wi-Fi password and band. Click Expand to expand the advanced settings and set the
parameters. Then, click Next.
(2) Configure the VLAN ID, address pool server and DHCP pool. The gateway is configured as the address pool
server by default to assign IP addresses to clients. If an access switch exists in the network, you can select
the access switch as the address pool server. Click Next after VLAN parameters are configured.
19
Network Monitoring
Advertisement
Need help?
Do you have a question about the RG-RAP73Pro and is the answer not in the manual?