Advertisement
Web-based Configuration Guide
(3) On the View/Group/Community/Client Access Control interface, enter the SNMP v1/v2c community name.
a
Click Add in the SNMP v1/v2c Community Name List pane.
b
Enter the group name, access mode, and view in the pop-up window.
c
Click OK.
2. Configuring SNMP v3
Application Scenario
You need to monitor and control devices, and use the third-party software to monitor and deliver device
information to public nodes (1.3.6.1.2.1). The security level of v3 is authentication and encryption.
Configuration Specification
According to the user's application scenario, the requirements are shown in the following table:
155
System Settings
Advertisement
Need help?
Do you have a question about the RG-RAP73Pro and is the answer not in the manual?