Ruijie RG-RAP73Pro Cookbook page 167

Web-based Configuration Guide
Click Edit. In the displayed dialog box, enter the IP address and subnet mask, and click OK. Change the IP
address of the LAN port. Enter the new IP address in the browser and log in to the device again to configure
and manage the device.
Table 4-1 LAN Settings
Parameter
IP Address
Subnet Mask
VLAN ID
Remarks
DHCP Server
Start IP Address
IP Count
Description
Default gateway for devices connected to the Internet through this LAN.
Subnet mask of devices on the LAN.
VLAN ID.
VLAN description.
After this function is enabled, devices on the LAN can automatically
obtain the IP address. You need to configure the start IP address, IP
count and lease time, as well as DHCP server options. For details,
see4.10 Configuring DHCP Server
Start IP address that a DHCP server automatically assigns to clients. The
start IP address must be within the network segment calculated based on
the IP address and subnet mask.
The number of assignable IP addresses depends on the LAN segment
and the start IP address.
112
Network Settings