Ruijie RG-RAP73Pro Cookbook page 113

Web-based Configuration Guide
After AP Mesh is enabled, you can set up a Mesh network through Mesh pairing between the devices that
support AP Mesh. You can press the Mesh button on the device to automatically discover a new device for Mesh
pairing or log in to the management page to select a new device for Mesh pairing. AP Mesh is enabled on the
device by default.
3.22 Domain Proxy
Go to the configuration page:

Method 1: Choose Network-Wide > Workspace > Wireless > Domain Proxy.

Method 2: Choose
Note
The method
When a client accesses a Wi-Fi network, the message "No Internet connection" or "The Wi-Fi is not connected
to the Internet" may be displayed. The possible cause is that the client's operating system introduces an Internet
detection mechanism. Generally, the detection mechanism sends a probe packet to a specified domain name
and evaluates whether the wireless network can access the Internet based on the detection result. If the DNS
server takes a long time to parse a domain name or returns a probe node with a long delay, the probe may be
deemed unreachable, causing a false network unavailability.
After the Domain Proxy function is enabled, the device returns the preset domain name node to the client,
reducing the misjudgment of network unavailability of the client.
Click +Add, enter the preset domain name and IP address, and click OK.
One-Device > Config > WLAN > Domain Proxy.
2 is supported only when the AP is the master device.
58
Wi-Fi Network Settings