Ruijie RG-RAP73Pro Cookbook page 81

Web-based Configuration Guide
Parameter
Hide SSID
Client Isolation
Band Steering
XPress
Layer-3 Roaming
802.11r
LimitSpeed
3.3 Configuring SSID and Wi-Fi Password
(1) Go to the page for configuration.

Method 1: Choose Network-Wide > Workspace > Wireless > Wi-Fi > Wi-Fi List. Select the Wi-Fi network,
and click Edit.

Method 2: Choose One-Device > Config > WLAN > Wi-Fi > Wi-Fi List. Select the Wi-Fi network, and click
Edit.
Description
Enabling the hide SSID function can prevent unauthorized user access to Wi-Fi,
improving security. However, mobile phones or computers cannot find the SSID
after this function is enabled. You must manually enter the correct name and
password to connect to Wi-Fi. Record the current SSID before you enable this
function.
After you enable this parameter, clients associated with the Wi-Fi are isolated
from one other, and end users connected to the same AP (in the same network
segment) cannot access each other. This improves security.
After this function is enabled, 5G-capable clients select 5G Wi-Fi preferentially.
You can enable this function only when Band is set to 2.4G + 5G.
After this function is enabled, the device sends game packets preferentially,
providing more stable wireless network for games.
After this function is enabled, clients keep their IP addresses unchanged when
associating with the same Wi-Fi. This function improves the roaming experience
of users in the cross-VLAN scenario.
Enabling the 802. 11r function can shorten the roaming handover time. The 802.
11r function is supported only when Encryption is set to Security or 802. 1x
(Enterprise). Once 802. 11r is enabled, the encryption type can only be WPA2-
PSK or WPA2-802. 1X.
After enabling Wi-Fi rate limiting, you can set the uplink and downlink rate limits
for users.
Rate Limit Per User: The rate limit applies to all clients connected to the
SSID.
Rate Limit All Users: All clients connected to the SSID share the configured
rate limit equally. The rate limit of each client changes dynamically with the
number of clients connected to the SSID.
26
Wi-Fi Network Settings