Ruijie RG-RAP73Pro Cookbook page 200

Web-based Configuration Guide
Table 6-1 Global Configuration Parameters
Parameter
SNMP Service
SNMP Version
Local Port
Device Location
Contact Info
(3) Click Save.
After the SNMP service is enabled, click Save to make basic configurations such as the SNMP protocol version
number take effect.
6.5.3 View/Group/Community/User Access Control
1. Configuring Views

Overview
Management Information Base (MIB) can be regarded as a database storing the status information and
performance data of network devices. It contains a large number of object identifiers (OIDs) to identify the status
information and performance data of these network devices.
Views in SNMP can limit the range of MIB nodes that the management system can access, thereby improving
the security and reliability of network management. Views are an indispensable part of SNMP and need to be
configured or customized according to specific management requirements.
A view can have multiple subtrees. The management system can only access MIB nodes in these subtrees, and
cannot access other unauthorized MIB nodes. This can prevent unauthorized system administrators from
accessing sensitive MIB nodes, thereby protecting the security of network devices. Moreover, views can also
improve the efficiency of network management and speed up the response from the management system.

Configuration Steps
Choose Network-Wide
Control > View List.
(1) Click Add under the View List to add a view.
Description
Indicates whether SNMP service is enabled.
Indicates the SNMP protocol version, including v1, v2c, and v3 versions.
The port range is 1 to 65535.
1-64 characters. Chinese characters, full-width characters, question
marks, and spaces are not allowed.
1-64 characters. Chinese characters, full-width characters, question
marks, and spaces are not allowed.
> Workspace > Network-Wide > SNMP > View/Group/Community/Client Access
145
System Settings