Ruijie RG-RAP73Pro Cookbook page 105

Web-based Configuration Guide
Caution

WIO is supported only in the self-organizing network mode.

The client may be offline during the optimization process. The configuration cannot be rolled back once
optimization starts. Therefore, exercise caution when performing this operation.
Table 3-2 Description of Tuning Mode
Parameter
Quick tuning
Deep tuning

Choose Quick optimization, and click OK.
Description
In this mode, external interference and bandwidth are not considered. A quick optimization
is performed to optimize channel, power, and management frame power.
In this mode, external interference and bandwidth are considered. A deep optimization is
performed to optimize channel, power, and management frame power. Click to expand
Advanced Settings to configure the scanning time, channel bandwidth and channels.
Scanning time: Indicates the time for scanning channels during the optimization.
Roaming Sensitivity: The roam sensitivity can be optimized based on the actual
environment to ensure fast roaming of wireless devices.
Transmit power: Increasing the transmit power enhances both the strength and
coverage of the wireless signal, but it may also introduce interference to surrounding
wireless networks. With this feature enabled, the AP will automatically adjust the
transmit power based on the environment.
2.4G
○
Channel bandwidth: Indicates the channel bandwidth. The channel bandwidth will
be calculated by the system if Default is selected.
○ Selected channels: Indicates the channels to be optimized.
5G
○ Channel bandwidth: Indicates the channel bandwidth. The channel bandwidth will
be calculated by the system if Default is selected.
○
Selected channels: Indicates the channels to be optimized.
6G
○
Channel bandwidth: Indicates the channel bandwidth. The channel bandwidth will
be calculated by the system if Default is selected.
○
Selected channels: Indicates the channels to be optimized.
50
Wi-Fi Network Settings