Ruijie RG-RAP73Pro Cookbook page 216

Web-based Configuration Guide

Prerequisites
When the v3 version is selected for the trap service, it is necessary to add a trap v3 user.

Configuration Steps
Choose Network-Wide
(1) Click Add in the Trap v3 Client List pane to add a trap v3 user.
(2) Configure trap v3 user parameters.
Table 6-9 Trap v3 User Configuration Parameters
Parameter
Dest Host IP
Port ID
> Workspace > Network-Wide > SNMP > Trap Settings.
Description
IP address of the trap peer device. An IPv4 or IPv6 address is supported.
The port range of the trap peer device is 1 to 65535.
161
System Settings