Advertisement
Network Monitoring
Configuration Guide
(6) Click View Details following the
icon to obtain information about the uplink device and RSSI.
6. Enabling WAN Port
The WAN port works as the wired uplink port of the AP by default. For the AP added to the target network through
Mesh pairing, the WAN port is disabled by default. If you want to connect the Mesh AP to other downlink device
in wired mode to expand the network, enable this port.
(1) Log in to the web interface of the network project. Choose Network-Wide > Devices > AP, and click Manage
next to a device in the AP list.
11
Advertisement
Need help?
Do you have a question about the RG-RAP73Pro and is the answer not in the manual?
Questions and answers