Ruijie RG-RAP73Pro Cookbook page 166

Web-based Configuration Guide
4.3 Configuring Internet Connection Type (IPv6)
Caution
This function is supported by only the RG-RAP73Pro in the AP mode.
Access the configuration page:

Method 1: Choose

Method 2: Choose Network-Wide > Workspace > Wired > WAN > WAN_V6 Settings.
Select the Internet connection type after confirming with the ISP. After completing the configuration, click Save.
The device supports the following Internet connection types:

DHCP: The current device will act as a DHCPv6 client and apply for the IPv6 address/prefix from the
upstream network device.

Static IP: If this Internet connection type is selected, you need to manually configure a static IPv6 address,
gateway address, and DNS server.

Null: The IPv6 function is disabled on the current WAN port.
4.4 Configuring LAN Port
Caution
This function is not supported when the device works in AP mode.
Access the configuration page:

Method 1: Choose

Method 2: Choose Network-Wide > Workspace > Wired > LAN > LAN Settings.
One-Device > Config > Network > WLAN > WAN_V6 Settings.
One-Device > Config > Network > LAN > LAN Settings.
111
Network Settings