Ruijie RG-RAP73Pro Cookbook page 206

Web-based Configuration Guide
4. Configuring v3 Users

Prerequisites
When the SNMP version is set to v3, the v3 group configuration is required.
Note
Select the SNMP protocol version, and click Save. The corresponding configuration options will appear on the
View/Group/Community/User Access Control page.

Configuration Steps
Choose Network-Wide
Control > SNMP v3 Client List.
(1) Click Add in the SNMP v3 Client List pane to add a v3 user.
(2) Configure v3 user parameters.
> Workspace > Network-Wide > SNMP > View/Group/Community/Client Access
151
System Settings