Ruijie RG-RAP73Pro Cookbook page 215

Web-based Configuration Guide
Table 6-8 Trap v1/v2c User Configuration Parameters
Parameter
Dest Host IP
Version Number
Port ID
Community Name/Username
Caution
The destination host IP address of trap v1/ v1/v2c users cannot be the same.
Community names of trap v1/ v1/v2c users cannot be the same.
(3) Click OK.
3. Configuring Trap v3 Users

Overview
Trap v3 is a network management mechanism based on the SNMP protocol. It is used to send alert notifications
to administrators. Unlike previous versions, trap v3 provides more secure and flexible configuration options,
including authentication and encryption features.
Trap v3 offers custom conditions and methods for sending alerts, as well as the recipients and notification
methods for receiving alerts. This enables administrators to have a more accurate understanding of the status
of network devices and to take timely measures to ensure the security and reliability of the network.
Description
IP address of the trap peer device. An IPv4 or IPv6 address is supported.
Trap version, including v1 and v2c.
The port range of the trap peer device is 1 to 65535.
Community name of the trap user.
At least 8 characters.
It must contain at least three character categories, including uppercase
and lowercase letters, digits, and special characters.
Admin, public or private community names are not allowed.
Question marks, spaces, and Chinese characters are not allowed.
160
System Settings