Ruijie RG-RAP73Pro Cookbook page 49

Configuration Guide
1.7 Configuration Wizard (Wireless Repeater Mode)
1.7.1 Getting Started

Before configuring the wireless repeater mode, configure the primary router and test that the primary router
can access the Internet.

Place the device where it can discover at least two-bar Wi-Fi signal of the primary router.
Caution
No Ethernet cable is required in the wireless repeater mode. The wireless network stability can be affected by
many factors. Therefore, the wired connection is recommended.
1.7.2 Configuration Steps
(1) Connect the device to a power supply without connecting an Ethernet cable to the uplink port, and click Start
Setup.
8
Fast Internet Access