Web-based Configuration Guide
○
If New Wi-Fi is selected, you can set a local Wi-Fi name and password. Clients will search out different
Wi-Fi signals.
Caution
After the configuration is saved, the AP will be disconnected from the Wi-Fi network and needs to
connect to the new Wi-Fi network. Exercise caution when performing this operation. Record the new Wi-
Fi name and password.
You are advised to install the AP in a position where the RSSI is greater than two bars of signal to
prevent signal loss. If the signal at the installation position is too weak, the Wi-Fi extension may fail or the
quality of extended signal may be poor.
4.6
Creating a VLAN
Caution
This function is not supported when the device works in AP mode.
115
Network Settings
Need help?
Do you have a question about the RG-RAP73Pro and is the answer not in the manual?
Questions and answers