Ruijie RG-RAP73Pro Cookbook page 62

Configuration Guide
(6) Click View Details following the
4. Configuration Steps for Search-based Pairing
Caution

Uplink device is an AP or EGW router.

The master device must be properly configured. Otherwise, AP mesh failure may occur due to constant
channel scanning.

The new AP must be in factory status.

It can be scanned only when the live network is enabled with Mesh (see
details).

Place the new AP no more than 2 meters away from the uplink device to ensure that the new AP can
receive the Wi-Fi signal from the uplink device. The new AP may fail to be scanned due to the long
distance or obstacles between it and the uplink device.
(1) Power on the new AP and place it near the AP or EGW router on the target network.
(2) Log in to the web interface of a device on the target network. In Network-Wide mode, click +Discover
Devices in the upper right corner of the Physical Topology page to scan the APs in other networks not
plugged in with Ethernet cables.
icon to obtain information about the uplink device and RSSI.
7
Network Monitoring
3.21 Enabling AP Mesh for