Ruijie RG-RAP73Pro Cookbook page 172

Web-based Configuration Guide
Parameter
DHCP Server
Caution
VLAN configuration is associated with the configuration of the uplink device. Therefore, refer to the
configuration of the uplink device when configuring a VLAN.
4.7 Configuring Port VLAN
Caution
The port VLAN can be configured only when the device works in AP mode.
Access the configuration page:

Method 1: Choose

Method 2: Choose Network-Wide > Workspace > Wired > LAN > LAN Settings.
(1) On the LAN Settings tab page, turn on Port VLAN, and click OK in the confirmation dialog box.
(2) Click Add. Enter the VLAN ID and description, and click OK to create a VLAN. The added VLAN is used to
set the VLAN, to which a port belongs.
Description
Enable the DHCP server function. After it is enabled, devices on the LAN can automatically
obtain IP addresses. After the DHCP service is enabled, you need to configure the start IP
address to be assigned, number of IP addresses to be assigned, and address lease term
for the DHCP server, and other DHCP server options. For details, see
DHCP Server.
One-Device > Config > Network > LAN > LAN Settings.
117
Network Settings
4.10 Configuring