Chapter 3 - Specifications - Lexicon RV-8 Service Manual

Lexicon
CHAPTER 3 – SPECIFICATIONS
Audio Input and Output Connectors
Analog Audio Inputs
Digital Audio Inputs
Sample Rates:
Accepts
Main Audio Outputs
Zone 2 Audio Outputs
Zone 3 Audio Output
Headphone Output
Amplifier Outputs
Main Zone Audio Performance
A/D Conversion
D/A Conversion
Frequency Response*
THD + Noise*
Dynamic Range*
Signal-to-Noise Ratio*
Input Sensitivity
Input Impedance
* Combined measurements of preamplifier and power amplifier sections
8 stereo (RCA) or 5 stereo and one 5.1-channel or 2 stereo and two
5.1-channel connectors
4 S/PDIF coaxial (RCA) and 4 S/PDIF optical connectors; coaxial and
optical input connectors conform to IEC-958, S/PDIF standards
44.1, 48, 88.2, 96kHz
16-24 bits PCM audio, Dolby Digital, DTS, DTS-ES and DTS-96k
discrete data formats
8 Unbalanced (RCA) connectors for Front L/R, Center, Sub, Side L/R
and Rear L/R
1 Unbalanced (RCA, variable output level) stereo connector,
1 Unbalanced (RCA, fixed output level) stereo connector, 1 S/PDIF
coaxial (RCA) connector and 1 optical connector
1 Stereo (RCA, variable output level) connector
1 Stereo (1/4-inch phone) connector
7 Channels, 2 channels assignable to Zone 2 or Zone 3
24-bit, 96kHz, multi-bit ∆Σ architecture
24-bit, 44.1 to 192kHz, multi-bit ∆Σ architecture
20Hz to 20kHz, +0.1dB/-0.1dB, -0.25dB at 10Hz, -0.5dB at 40kHz,
reference 1kHz
Below 0.02%, 20Hz to 20kHz, 140Wrms all channels driven
105dB minimum, 22kHz bandwidth, "A" weighted; 102dB minimum,
22kHz bandwidth, unweighted
105dB minimum, 22kHz bandwidth, "A" weighted; 102dB minimum,
22kHz bandwidth, unweighted
200mVrms (2Vrms for maximum output level) at 0dB input gain
100kΩ in parallel with 150pF
3-1