Installation Instructions - Lexicon MC-12 Upgrade Instructions

MC-12 to MC-12 Balanced Upgrade Instructions
CONTENTS
This upgrade kit includes:
Item (Quantity)
MC-12 Balanced chassis
4x10mm screws (4)
Black 3/8 inch hole plugs (4)
MC-12 to MC-12 Balanced
Upgrade Instructions
This kit does not include the following tools, which are
also required to complete this upgrade:
• Phillips head screwdriver (magnetic tip preferred).
• Allen hex head wrench (2.5mm).
Turn off and disconnect all power
WARNING
to the unit prior to performing the
upgrade.
4

INSTALLATION INSTRUCTIONS

Performing this upgrade is a straightforward process. But
to avoid complications, please read and follow these
instructions carefully. Pay particular attention to the
Part No.
precautions listed in the Safety Summary (page 2), as
well as those included throughout the instructions.
(Multiple)
Damage caused during installation may void the
640-10496
manufacturer's warranty or standard repair policies.
540-02472
1. Unplug the unit and, if necessary, remove the unit
070-14894
from the rack.
2. Remove the 12 screws on the top cover of the unit,
as shown in the illustration below. This step requires
an Allen hex head wrench (2.5mm).
Lexicon