Tuner Setup - Lexicon RV-5 User Manual

Setup

TUNER SETUP

SETUP TUNER SETUP
Selecting the SETUP menu TUNER SETUP option opens the TUNER SETUP menu, which is used to configure the AM/FM radio tuner.
Default
Parameter
Setting
REGION USA
SCAN SENS LOW
AUTOLOAD N/A
CLEAR ALL N/A
TUNER PRESETS N/A
DISPLAY RDS NAME RDS NAME, PRESET NAME,
RADIO TEXT ON
SCROLL RATE MEDIUM
AUTO FREQUENCY ON
3-72
MAIN MENU SETUP
INPUTS
MODE ADJUST
SPEAKERS
AUDIO CONTROLS
I/O CONFIG
TUNER PRESETS
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
Possible Settings
USA, EUROPE, JAPAN, E. EUR
LOW, MED, HIGH
N/A
N/A
N/A
FREQUENCY
ON, OFF
SLOW, MEDIUM, FAST
ON, OFF
TUNER SETUP
REGION USA
SCAN SENS LOW
AUTOLOAD
CLEAR ALL
TUNER PRESETS
DISPLAY RDS NAME
RADIO TEXT ON
SCROLL RATE MEDIUM
AUTO FREQUENCY ON
REGION
TUNER SETUP REGION
SETUP
Sets the tuner region. The four regions are USA, EUROPE, JAPAN and
E. EUR. The table on the next page lists the band limits and incre-
ments for these regions.
Note:
The tuner user interface will not allow illegal frequencies to be entered. It
will always set at the closest valid frequency. For example, if the RV-5 has
USA set as the current region, entering 107.8MHz will result in 107.9MHz
being the actual tuner frequency. If the value is less than the lowest
frequency, it will set it to LO LIMIT for the appropriate region. Likewise, if
the dialed value is larger than the highest allowed frequency, it will
actually set it to the HI LIMIT for the appropriate region.
USA
EUROPE
JAPAN
E. EUR
USA, EUROPE, JAPAN, E. EUR
Lexicon